LBTS-TC: Arbin’s Turnkey Battery Testing All-In-One Cell Testing with integrated test channels, temperature chambers, and cell holders. Precision: 100ppm measurement with industry-leading 24-bit resolution across four current ranges per test channel Turn-Key Solution, arrives fully integrated with channel and temperature cables interconnected from channel to MZTC Dynamic Temperature Setpoints managed independently per isolated thermal chamber […]
Blog
Topics
Most Popular
- Turnkey Battery Testing
- Enhancing Battery Testing Safety with a Door Switch Interlock System
- Integration of Arbin Instruments with Gamry Potentiostats for High-Frequency EIS up to 2 MHz
- How to perform Internal Resistance measurement according to IEC 61960 with Arbin?
- How to Test a Protection Circuit Module (PCM) Using ARBIN EOL
LATEST
Enhancing Battery Testing Safety with a Door Switch Interlock System
I. Purpose and Applicability Battery testing—whether for electric vehicles, consumer electronics, or industrial systems—demands strict safety protocols. One often overlooked but critical element in test chamber safety is the door switch interlock system. This simple yet powerful mechanism helps prevent injuries, equipment damage, and test data corruption. In this article, we’ll explore how door switch […]
Integration of Arbin Instruments with Gamry Potentiostats for High-Frequency EIS up to 2 MHz
According to the standard specifications published by Arbin, integrating a Gamry device with an Arbin system typically limits the device’s original frequency capability from 2 MHz down to 100 kHz. However, in this article, we will introduce a solution that allows the system to retain the full 2 MHz frequency, with some trade-offs to consider. Pre-Conditions for Achieving […]
How to perform Internal Resistance measurement according to IEC 61960 with Arbin?
IR measurement is crucial to have an insight into a battery. There are many way, i.e. many standard to measure battery’s IR. This article will introduce IEC 61960 standard and how to implement it using Arbin’s equipments. IEC 61960 standard for battery IR: In this standard, a discharge pulse of 0.2C is given for 10 […]
ARBIN NEWS VIEW ALL
Battery multiple points temperature measurement
Importance of Temperature Monitoring in Battery Testing Accurate temperature monitoring is a critical aspect of battery testing to ensure both safety and data integrity. One key application is the prevention of thermal runaway or overheating during test procedures. When a battery exceeds a predefined temperature threshold, the test must be safely halted to protect the […]
How to detect NiMH battery fully charged status
Voltage, Temperature, and Delta-V: Indicators of Full Charge in NiMH Cells The Nickel-Metal Hydride (NiMH) battery is a type of rechargeable battery that uses nickel oxide hydroxide (NiOOH) as the positive electrode (cathode) and a hydrogen-absorbing alloy as the negative electrode (anode). Compared to nickel-cadmium (NiCd) batteries, NiMH batteries offer several distinct advantages: Thanks to […]
Battery Test for Electric Vehicles (EV) Application Notes
Purpose and Applicability: This application notes introduce a series of tests for evaluating the performance of life behavior of batteries for electric vehicles (EV).Arbin works with electric vehicle industry leaders around the world, and provides a comprehensive battery test solution for cells, modules, and packs of all sizes.These tests can be easily performed and installed […]
Turnkey Battery Testing
LBTS-TC: Arbin’s Turnkey Battery Testing All-In-One Cell Testing with integrated test channels, temperature chambers, and cell holders. Precision: 100ppm measurement with industry-leading 24-bit resolution across four current ranges per test channel Turn-Key Solution, arrives fully integrated with channel and temperature cables interconnected from channel to MZTC Dynamic Temperature Setpoints managed independently per isolated thermal chamber […]
Honeywell and Arbin Instruments Team Up to Revolutionize Large Scale Lithium-Ion Battery Manufacturing
Honeywell today enhanced its Battery Manufacturing Excellence Platform (MXP) for lithium-ion battery manufacturers and gigafactories through a collaboration with Arbin Instruments to integrate an advanced autonomous formation system.
Ambri Selects Arbin Instruments’ Battery Test Equipment for Expansion of Next Generation Development Lab
Arbin Instruments, a leader in battery testing instrumentation, has been selected by Ambri to provide high current battery testing systems for its pilot manufacturing expansion. These systems will facilitate the development and commercialization of its revolutionary Liquid Metal™ batteries. Ambri’s next-generation batteries offer long-duration stationary energy storage for a variety of electric grid and datacenter […]
Avoiding BMS Damage During a Sudden Disconnect Event
Arbin Instruments offers two features that, especially when applied together, can minimize the risks associated with the sudden disconnect of a battery mid-test.
Europe’s Electric Expansion: The Rise of Gigafactories and Arbin’s Response
As part of our aim to support those moving the battery industry forward, Arbin Instruments is committed to battery development in Europe. Arbin is working to address the increasing demand for battery research and production in two key ways: cycler and data management solutions for larger operations and a dedicated, growing Arbin Europe team.
Arbin CAN: BMS-to-Tester Communication with Arbin’s CAN Bus Capability
Arbin’s Mits Pro employs the CAN Bus protocol, allowing CAN messages to be sent and received between the battery test equipment and the Battery Management System, and allows external control of the Arbin tester.
Expanding into the Future with the Battery Industry: Arbin Looks Forward to 2022
Having celebrated 30 years in 2021, Arbin now prepares to look forward to 2022, continuing our mission to rise up to every challenge we come across. Arbin is committed to remaining at the forefront of battery technology, providing state-of-the-art battery test equipment to facilitate research. The battery industry has grown exponentially over the years. The […]
INDUSTRY NEWS VIEW ALL
Batteries and Wearable Medical Technology
Innovations in medical technology play a huge role in improving preventive medicine and chronic illness management. Learn how Arbin’s battery test equipment supports advancements in medical technology.
3 Industry-Leading Applications of Structural Batteries
What does it mean to have a “massless” battery, and what are the possible applications for this type of battery? Learn how Arbin can support developments in structural batteries.
How are batteries recycled?
Strong materials research will play a part in creating more sustainable and recyclable batteries in the future. Learn how Arbin can help you take on your next challenge.
How Nanotechnology is Facilitating Battery Development
Nanotechnology has the potential to make big waves in battery development, research, and manufacturing. Learn how Arbin’s high precision battery test equipment supports battery research.
Why is lithium-ion battery recycling still limited?
As batteries become more and more prevalent in everyday life, from household products to energy storage, battery waste should be properly handled and taken care of. Learn more about how Arbin helps customers on the forefront of battery research.
How does weather affect the electrical grid?
With a large majority of power outages caused by weather events, it is crucial to create a system that can hold up against them and recover as soon as possible. Find out more about how Arbin’s equipment supports the grid storage industry.
What are some different types of energy storage?
Each type of energy storage device has their advantages and limitations. Arbin Instruments has high quality equipment to test different types of solutions.
How Micromobility is Changing How We Move
Micromobility solutions will continue to reshape our relationship to transportation and consider its impacts on the environment. Arbin is committed to being at the forefront of battery testing, innovating and improving technology for battery materials research, testing and developing.
The Clean Energy Shift
The US renewable energy industry has been growing steadily in the past two decades. From 2000 to 2018, renewable energy grew 100% and in 2020, renewable sources made up 11.4% of the country’s energy source. With the government’s new initiative for the power-sector to be decarbonized by 2035, the shift towards clean energy will most […]
Is EV fast-charging finally viable?
The availability of fast-charging will be one of the biggest drivers for electric vehicle adoption. Current public direct current chargers can charge a vehicle up to 80% in half-an-hour to an hour — still quite a long time compared with the few minutes it takes to refuel an ICE vehicle. Multiple manufacturers and developers are […]