Application:
1. What types of fuel cells will you be testing (select all that apply)? *
2. Please select the number of channels for your fuel cell testing system:
3. Do you test single cells or stacks?*
4. What type of testing do you plan to use the system for? *
5. Which of the following standard FCTS systems are you interested in? Please select the standard system which is closest to your requirements. Note: standard systems can be modified to exactly meet your requirments.*
Electronic Load Requirments:
6. What is the MAXIMUM voltage required ? *
Volts
7. What is the MINIMUM voltage required ? *
Volts
8. What is the maximum current required? *
Discharging Amps
9. What is the smallest current you need to control or measure? *
Amps
10. What is the maximum power required? *
Discharging Watts
Reactant Flowrates:
11. Please specify the TYPE of gas or liquid fuel you need on the ANODE side (such as Hydrogen, Reformate Mix, Methanol, CO, Nitrogen, etc.) AND the maximum flowrate required for each fuel selected. NOTE: If liquid fuel, units should be in ccpm. The standard anode gas is Hydrogen and the standard flowrate for each system above can be found here for 10W - 200W and here for 500W - 10kW. If you would like the standard configuration, simply write "standard" under Fuel 1.*
12. Please specify the TYPE of gas or liquid you need on the CATHODE side (such as Oxygen, Air, Nitrogen, etc.) AND the maximum flowrate required for each reactant selected. Note: If liquid reactant, units should be in ccpm. The standard cathode gas is Air and the standard flowrate for each system above can be found here for 10W - 200W and here for 500W - 10kW. If you would like the standard configuration, simply write "standard" under Oxidant 1.*
Humidification
Temperature Control
13. Do you need a liquid stack heating/cooling loop?*
14. Do you need PID electronic heater cartridge control?*
15. What is the maximum opperating temperature required?
120°C (standard)
180°C Gas Supply Only (gas heater upgrade)
180°C Gas Supply AND Stack Heating (gas heater and stack heating upgrade)
Auxiliary Measurments and Options
16. Do you require individual cell voltage measurment channels (auxiliary voltage)?
If yes, how many?
0
8
16
24
32
40
48
56
64
72
more
17. Do you require any blank thermocouple input channels? Note: The system measures all gas and liquid temperatures automatically. These are additional temperature input channels.
If yes, how many?
0
8
16
24
32
40
48
56
64
72
more
18. Do you require any other optional items? (Hold down ctrl to choose multiple selections)
No
Input Gas Filters
Input Gas Pressure Regulators
Heater Cartridges
Water Managment System
Hydrogen Generation System (600sccm)
Secondary Humidity Sensor Anode Side
Secondary Humidity Sensor Cathode Side
Digital I/O (8ch input, 8ch output)
4 fixed frequency AC Impedance Option (100, 500, 1000, 2000Hz)
Pressure Transducer Input Module (8ch)
Fuel Cell Fixture 5cm2
Fuel Cell Fixture 25cm2
Fuel Cell Fixture 50cm2
Fuel Cell Fixture 100cm2
Hydrogen Recycling System (typically for high power FCTS)
More info about options
Miscellaneous
19. Do you have a particular budget that you would like for us to know about?
Yes
No
Budget
20. When do you plan to purchase? *
21. How did you learn about Arbin Instruments? *
22. Other Comments or Information we should know about?
Contact Information:
* First Name:
* Last Name:
* Company or Institution Name:
* Physical or Shipping Address
* Primary Phone Number:
Secondary Phone Number
* Email Address:
Subscribe me to the bi-annual Arbin Newsletter
Quotation Request Form for Fuel Cell Test Systems
Phone: (979) 690-2751